Shot blasting machine has a good noise reduction effect

　　In our lives, when some machines are in operation, they often produce a lot of noise. The decibels generated by machine operations far exceed the range of people's tolerance, which makes people feel particularly annoying. So many machines are in production. In the process, noise reduction treatment is carried out to reduce noise damage to people. The shot blasting machine is also subjected to noise reduction treatment during the use process, so the noise generated is not large.

　　One of the reasons for the noise is that during use, some parts inside the machine are not stable enough, and a lot of noise is generated. We know that the sound is caused by the vibration of the object. The more vibrating, the louder the sound. Larger, that is, the greater the noise generated, the shot blasting machine is composed of multiple parts and its shell part is welded together by steel plate and section steel, and the welding is relatively strong, which makes the machine in the process of use , Will not produce loud noises due to the vibration of the shell.

　　In order to reduce the generation of noise, a noise reduction room is installed on the shot blasting machine. The rock wool board with a thickness of 75 mm is used as the main material, and then the section steel is used as the main frame to stabilize the section steel. The performance is very good, and the rock wool board is not easy to produce a big impact during the vibration of the machine, so that the noise generated by the machine is very small when the machine is working.

　　Now people are paying more and more attention to environmental protection, and noise pollution is considered to be one of the four major pollutions in today’s society. The state has also increased its efforts to control this pollution. Almost all machines are now paying more attention to noise treatment. , And the shot blasting machine pays special attention to this point, it produces very little noise during use.