Hotline
+86-13692841862
Email:info@mayflay.com
Add::NO.289,Guangreng Rd,Xiaojinkou Str.Huicheng Dis,Huizhou City,Guangdong Province,China.
welcome to MAYFLAY
For consultation/feedback, please call the service hotline: +86-13692841862 Email:info@mayflay.com
Advantages of feeding with three-in-one NC feeder for punch press
The three-in-one NC feeder is also a three-in-one feeder device controlled by a CNC NC servo system. It is equipped with automatic feeding equipment on a punch. When our traditional punching machine is produced, there are manual operations. The punch is punched once and the operator feeds it once. The operation cycle is very long, so many manufacturers give up this mode of operation, and what are the benefits of using the NC three-in-one feeder for automatic feeding!
1. Save raw materials. The use of the punch three-in-one feeder can greatly save raw materials and increase the utilization rate of materials. After the punch realizes automatic production, the raw materials can be directly fed from the uncoiler to the punch production. Material waste. If it is an operator operation, the coil material needs to be cut first, which will cause excess waste during the stamping process.
2. Improve the quality of stamping products. During production, it can feed accurately and stably. The feeding accuracy can reach 0.02mm, and it can be operated continuously for 24 hours. If there are too many unstable factors during manual operation, the quality of stamping products will not be affected. guarantee.
3. The three-in-one feeder reduces production safety hazards. After use, it does not require too much manual involvement. Most of the time, the punch processing area is not needed, and only the servo control panel needs to be operated, which prevents the operator from directly approaching the punch processing. Zone, reducing the safety problems caused by the uncertain factors of the punch.