Automatic Turntable Sand Blasting Cabinet

The main features of this series of products are: large turntable intermittent rotation, small turntable rotation. Adjust the position of each spray gun according to the shape of the workpiece. The spray gun can be oscillated or sandblasted at fixed points. The oscillating speed of the spray gun and the rotation of the small turntable can be controlled by frequency conversion.

Scope of application:

    Widely used in small household appliances industry, suitable for mass production of inner and outer surfaces of discs, cylinders, square workpieces, especially suitable for mass production of the following products, glass lampshades, non-stick pans, electric frying pans, rice cookers, electric kettles , Soy milk machine, heating plate, flashlight, baking pan, stainless steel wash basin, communication equipment and other workpieces.

model

         BC-2224

      BC-1416

Maximum processing size

Φ450X250mm

Φ210X120mm

Sandblasting box size

2200x2600x2210mm

1400x1600x1430mm

Air pressure and flow

             5-7bar 1m3 / min 【Single gun】

Maximum workpiece weight

≤10kg 【Special requirements can be customized】

       ≤6kg 【Special requirements can be customized】

Sandblasting working method

                  Large turntable intermittent

Number of spray guns

12 pcs

8 pcs

Work station

2--8 seats

2-8 seats

Rust removal level

                      Sa2.5-Sa3

Abrasive type

               40 --- 150 # Corundum

Dust removal method

               Efficient bag dust removal

Total power

           9.9kw

             7.8kw

　　Automotive Shot Blasting and Peening solutions

　　Sandblasting is to use compressed air to spray abrasive to the surface of workpiece at high speed. The purpose of sandblasting is to improve the appearance quality of workpiece surface by removing oxide layer and rust. Shot peening is to make the high-speed hard particles (generally steel particles) hit the surface of metal workpiece, in order to improve the fatigue strength of metal surface. Sand blasting and shot blasting are two different processes and different tools are used. However, both of them can be recycled.

　　The technology of shot blasting cleaning machine replaces the common cold and hot forming process to form large thin-walled aluminum parts, which can not only avoid the residual tensile stress on the surface of the parts, but also obtain the favorable compressive stress for the parts.

　　It should be noted that the service temperature of the parts treated by shot blasting machine should not be too high, otherwise the compressive stress will disappear automatically at high temperature, thus the expected effect will be lost. Their service temperature is determined by the material of the parts, which is about 260-290 ℃ for general steel parts and 170 ℃ for aluminum parts.