Cleaning Equipment Hook Type Shot Blasting Machine

Cleaning Equipment Hook Type Shot Blasting Machine is a new type of special equipment designed and manufactured according to user requirements. It is suitable for cleaning structural parts. Through shot blasting, not only can remove the sticky sand, rust, scale, dirt, etc. on the surface of the workpiece, so that the surface of the workpiece shows the original color of the metal, eliminate the internal stress of the workpiece, improve the fatigue resistance of the workpiece, and increase the adhesion of the paint film when painting , And finally achieve the purpose of improving the surface and internal quality of the workpiece.

Cleaning Equipment Hook Type Shot Blasting Machine is a double hook type shot blasting equipment. It consists of a shot blasting chamber, a shot blaster assembly, and a pellet circulation purification system (screw conveyor, elevator, separator, projectile Control system), hook system, hook rotation device, maintenance platform, dust removal system, air control system, electrical control system, etc.

1. The blasting chamber adopts Mn13 wear-resistant protective plate, which effectively improves the service life of the blasting chamber.

2. The pill supply system uses a special pneumatic control pill gate valve. The cylinder used by our company is a compact and lightweight cylinder without a base and an ear seat. It is more stable and reliable than the traditional seated cylinder, and it is convenient and fast to repair.

3. The filter cartridge dust collector is equipped, the filter element is made of flame retardant material, and the pulse is automatically vibrated to remove the dust.

4. There is a secondary cyclone separator, which can effectively separate the dust agent and the steel shot, reducing the waste of abrasives and the wear of the dust filter cartridge.

　　Automotive Shot Blasting and Peening solutions

　　Sandblasting is to use compressed air to spray abrasive to the surface of workpiece at high speed. The purpose of sandblasting is to improve the appearance quality of workpiece surface by removing oxide layer and rust. Shot peening is to make the high-speed hard particles (generally steel particles) hit the surface of metal workpiece, in order to improve the fatigue strength of metal surface. Sand blasting and shot blasting are two different processes and different tools are used. However, both of them can be recycled.

　　The technology of shot blasting cleaning machine replaces the common cold and hot forming process to form large thin-walled aluminum parts, which can not only avoid the residual tensile stress on the surface of the parts, but also obtain the favorable compressive stress for the parts.

　　It should be noted that the service temperature of the parts treated by shot blasting machine should not be too high, otherwise the compressive stress will disappear automatically at high temperature, thus the expected effect will be lost. Their service temperature is determined by the material of the parts, which is about 260-290 ℃ for general steel parts and 170 ℃ for aluminum parts.