Feeder installation steps | Feeder installation method

　　Feeder installation steps | Feeder installation method

　　The correct installation of the feeder is the basis to ensure the accuracy of the stamping products in the entire stamping production. We all know that the application of the feeder reduces the labor cost and improves the production efficiency for the punch stamping enterprise, and the feeding of the feeder is relatively manual. The machine is more stable and accurate. Fully automatic production avoids mechanical accidents. NC punch feeders are currently widely used. After the feeder is purchased, the manufacturer will arrange for technicians to bring the supporting parts of the feeder to the door for installation and test before delivery to customers. As a feeder manufacturer, Dongguan Youyi will share with you the installation steps of the feeder!

　　1. First, check out the accessories required for the installation of the feeder, including the following accessories

　　1. The main body of the feeder equipment

　　2. Feeder fixing plate, (for fixing the body)

　　3. Screws used for the mounting plate of the feeder body

　　4. Control the electric cabinet box and relax the levers and other accessories

　　2. The fixed plate is processed according to the requirements of the punch position and the demand of the manufacturer. Determine the installation position of the NC servo punch feeder (It can be installed on the left or right side of the punch according to customer requirements, depending on the actual situation and customer needs.)

　　3. Install the fixed plate of the feeder. Install the fixed plate with inserts that have been processed according to the size and face the punch table in the middle of the side of the punch, keep it perpendicular and parallel to the table, and then determine the position of the screw on the punching and tapping. screw)

　　4. Fix the body of the NC servo feeder on the fixed board with screws. The key position on the fuselage is aligned with the keyway on the fixed plate