welcome to MAYFLAY
For consultation/feedback, please call the service hotline： +86-13692841862 Email：info@mayflay.com
Surface treatment Soutions
Coil Handling and Press Feeding Solutions
The use and operation of the hook shot blasting machine has strict procedures, and the order cannot be confused or reversed, otherwise mechanical or electrical accidents are prone to occur.
1.Start the dust removal fan and reach the rated speed.
2. Start the hoist and screw conveyor motor.
3. Drive the hook with the workpiece into the cleaning room.
4. Make the workpiece rotate automatically.
5. Close the door of the chamber body and lock it tightly. At this time, the stroke switch interlocked with the shot blasting device is in a path to allow the shot blasting device to start.
6. Start two shot blasting machines and reach the rated speed.
7. Start the pill supply gate and start the cleaning operation.
8. Wait until the specified time, after the cleaning is completed, close the pill supply gate.
9. Turn off the shot blaster motor and wait for it to stop.
10. The hook stops rotating.
11.The hoist and screw conveyor stop rotating.
12. Open the door, open the hook out of the room, check the cleaning quality, if it is qualified, unload the workpiece, if it is not, return to the chamber to start and clean for a certain time according to the above procedure.
13. Turn off the fan.
14. If the multi-hook workpiece needs to be cleaned continuously, the hoist, screw conveyor motor and fan can be kept, and other procedures should be repeated until all of them are completed.
sign up newsletter
Email：info@mayflay.com
Add:：NO.289,Guangreng Rd,Xiaojinkou Str.Huicheng Dis,Huizhou City,Guangdong Province,China.
