Overhead conveyor shot blasting machines with hook

Overhead conveyor shot blasting machines with hook is the most flexible equipment type. It can be divided into batch suspension type, which is to move a batch of parts into, start to rotate, complete blasting and remove, and continuous suspension type is equipped with a monorail suspension system, which can continuously move the workpiece and pass the machine.

The batch suspension equipment is used for sand cleaning and core removal of fragile parts and wearing parts, and can be used for derusting and shaping of the metal processing industry. Small, medium and large parts can be cleaned very economically.

Typical equipment types include:

SPH rotary hook type shot blasting machine

HKD rail hanging shot blasting machine

Heavy-duty HK rail-mounted shot blasting machine

The continuous hanging shot blasting machine realizes the automation of the production process while improving the working environment and the efficiency and cost-effectiveness of the shot blasting / shot blasting process. The production process is clearly arranged, and manual procedures are replaced with automated procedures to make the working environment safer. In addition to the above advantages, the advantages of small equipment footprint, short transportation distance, and no need for intermediate storage also greatly reduce production costs.

Typical equipment types include:

HKS rail hanging shot blasting machine

Heavy-duty PL rail-mounted shot blasting machine

　　Automotive Shot Blasting and Peening solutions

　　Sandblasting is to use compressed air to spray abrasive to the surface of workpiece at high speed. The purpose of sandblasting is to improve the appearance quality of workpiece surface by removing oxide layer and rust. Shot peening is to make the high-speed hard particles (generally steel particles) hit the surface of metal workpiece, in order to improve the fatigue strength of metal surface. Sand blasting and shot blasting are two different processes and different tools are used. However, both of them can be recycled.

　　The technology of shot blasting cleaning machine replaces the common cold and hot forming process to form large thin-walled aluminum parts, which can not only avoid the residual tensile stress on the surface of the parts, but also obtain the favorable compressive stress for the parts.

　　It should be noted that the service temperature of the parts treated by shot blasting machine should not be too high, otherwise the compressive stress will disappear automatically at high temperature, thus the expected effect will be lost. Their service temperature is determined by the material of the parts, which is about 260-290 ℃ for general steel parts and 170 ℃ for aluminum parts.