Roller Conveyor Blast Cleaning Machine

Roller Conveyor Blast Cleaning Machine is a shot blasting machine product produced by our company. Roller Conveyor Blast Cleaning Machine is welcomed by many customers. Many people are more curious. Why is Roller Conveyor Blast Cleaning Machine so popular? ? In fact, Roller Conveyor Blast Cleaning Machine is popular, not without reason. Roller Conveyor Blast Cleaning Machine is a very powerful shot blasting machine equipment. Many people do not understand Roller Conveyor Blast Cleaning Machine, so they do not understand why Roller Conveyor Blast Cleaning Machine is so popular. Today we will talk about the reasons why Roller Conveyor Blast Cleaning Machine is selling well.

Roller Conveyor Blast Cleaning Machine

Working principle: A defined number of workpieces are added to the cleaning room. After the machine is started, the projectiles thrown by the shot blaster at high speed form a shot beam, which strikes the surface of the workpiece evenly, thereby achieving the purpose of cleaning and strengthening. The projectiles and sand particles thrown into the promotion machine are promoted to the separator by the promotion machine for separation. The dust is sucked into the dust collector for filtration by the fan, and the clean air is discharged into the atmosphere. The dust on the cloth bag is dropped by the mechanical vibration into the dust collection box at the bottom of the dust collector. The user can remove it on schedule. Reusable. The shot sand mixture is recovered into the chamber body by the reuse pipe, and then reused after the separator is separated. The clean projectile is fed by the electromagnetic supply gate to the shot blasting machine to throw the workpiece.

Roller Conveyor Blast Cleaning Machine machine maintenance and maintenance:

1. After each work shift, the machine should be cleaned again;

2. Always check the wear of the protective plates in the cleaning room and the orientation sleeves and shot wheel in the shot blaster. If the wear is severe, they should be replaced immediately;

3. It should be lubricated as scheduled, and often check whether the machine is flexible. See Table 2 for equipment lubrication points;

4. Regularly check the transmission departments, clean parts and replace worn parts;

5. When the machine is inspected and maintained, the power supply must be blocked to avoid accidents;

6. The wear-resistant protective plate of the cleaning room can be replaced regularly according to the wear situation. When replacing the guard plate, the installation gap between the guard plates should be controlled within 2 mm.

　　Automotive Shot Blasting and Peening solutions

　　Sandblasting is to use compressed air to spray abrasive to the surface of workpiece at high speed. The purpose of sandblasting is to improve the appearance quality of workpiece surface by removing oxide layer and rust. Shot peening is to make the high-speed hard particles (generally steel particles) hit the surface of metal workpiece, in order to improve the fatigue strength of metal surface. Sand blasting and shot blasting are two different processes and different tools are used. However, both of them can be recycled.

　　The technology of shot blasting cleaning machine replaces the common cold and hot forming process to form large thin-walled aluminum parts, which can not only avoid the residual tensile stress on the surface of the parts, but also obtain the favorable compressive stress for the parts.

　　It should be noted that the service temperature of the parts treated by shot blasting machine should not be too high, otherwise the compressive stress will disappear automatically at high temperature, thus the expected effect will be lost. Their service temperature is determined by the material of the parts, which is about 260-290 ℃ for general steel parts and 170 ℃ for aluminum parts.