Spinner Hanger Hook type shot blast machine

The Spinner Hanger Hook type shot blasting machine is a relatively common large shot blasting machine. His use is very extensive. Today I will tell you about the scope of use of theSpinner Hanger Hook type shot blasting machine.

Scope 1. Clean up the oil

Scope 2. Anti-skid treatment

Scope 3: Clean up the marking line

To know that the roughness of the road will have a great impact on traffic, every year we can see from the TV news all kinds of traffic accidents that occur due to road slippage. The pill machine processes the asphalt above the road to improve the skid resistance of passing cars.

Use range of road surface shot blasting machine

Experts know that the waste marking lines on the road are difficult to clean, but since the appearance of theSpinner Hanger Hook type shot blasting machine is different, because theSpinner Hanger Hook type shot blasting machine can easily clean up the waste marking lines on the road. Especially the cleaning of the surface of the pedestrian street is the cleaning of the cold paint marking line. As long as theSpinner Hanger Hook type shot blasting machine is used, the problem can be very simple.

Due to weather and other reasons, the asphalt road is prone to flooding, which can easily affect the normal use of the car. If you use aSpinner Hanger Hook type shot blasting machine or a floor moving shot blasting machine to clean up, put The treatment of asphalt flooding on the road surface can effectively improve this situation and improve the vehicle's anti-slip properties.

In addition to the three cleaning ranges mentioned above, the road surface shot blasting machine can also process the surface of the road surface, increase the roughness of the surface of the road surface, so that they can become more durable and extend the service life of the road surface. It can make the original base layer and resin cover more tightly combined.

The working principle of the shot blasting machine is to hit the steel surface with high-speed steel shots

1. Clean steel surface

Everyone should be familiar with the term of shot blasting machine, but in fact it has been widely used in our lives. Shot blasting machine can be said to be a common tool in our daily life, especially when grinding steel. The reason why it can be widely used in our lives is naturally inseparable from its role. So let's take a look at what it does.

2, rust removal

The working principle of the shot blasting machine is to hit the steel surface with high-speed steel shots, and the high-speed hit generates a huge force, which causes the corrosion of the steel surface to crack. High-strength impact can effectively remove rust attached to the surface, drive the entire steel in all directions, and play a role in high-strength rust removal.

The above are the three main functions of the shot blasting machine. They can clean the surface of the steel and polish excess burrs to present a smooth surface. At the same time, the high-speed hitting principle can increase the original strength of the steel and is suitable for the use of hair tresses. In addition, it can also be used to remove rust on the steel surface, which is simple and convenient, and can be quickly cleaned without leaving traces. Because of these three functions, shot blasting machines are widely used in various industries.

　　Automotive Shot Blasting and Peening solutions

　　Sandblasting is to use compressed air to spray abrasive to the surface of workpiece at high speed. The purpose of sandblasting is to improve the appearance quality of workpiece surface by removing oxide layer and rust. Shot peening is to make the high-speed hard particles (generally steel particles) hit the surface of metal workpiece, in order to improve the fatigue strength of metal surface. Sand blasting and shot blasting are two different processes and different tools are used. However, both of them can be recycled.

　　The technology of shot blasting cleaning machine replaces the common cold and hot forming process to form large thin-walled aluminum parts, which can not only avoid the residual tensile stress on the surface of the parts, but also obtain the favorable compressive stress for the parts.

　　It should be noted that the service temperature of the parts treated by shot blasting machine should not be too high, otherwise the compressive stress will disappear automatically at high temperature, thus the expected effect will be lost. Their service temperature is determined by the material of the parts, which is about 260-290 ℃ for general steel parts and 170 ℃ for aluminum parts.