The difference between punch manipulator and stamping robot!Compact Press Line

　　Punch manipulator is a device that replaces manual labor to carry out multi-station handling of stamping semi-finished products during stamping production, which is very convenient and stable. So what is the difference between it and the stamping robot? In fact, the stamping robot has the same function, except that the two structures are different. The operation mode is just to imitate the human hand movement and the multi-joint handling method.

　　The stamping robot fully draws on and integrates the dual characteristics of the robot's high degree of freedom and the high efficiency and stability of the link manipulator. It is manifested in its intelligent linkage of more than 5 axes and breaks through the demanding requirements of the link manipulator for equipment, molds and venues. This is also new. The reason for the few station applications is that although he can also connect punches and pneumatic punches at will, regardless of the tonnage or the height of the machine, they can be connected to achieve free combination of equipment, and the cost is also greater.

　　The punch manipulator is specially configured for various punches and hydraulic presses, and is an automatic equipment that efficiently replaces manual loading and unloading. Its targeted collocation can be customized. In line with the production of special punches. What are the differences between Youyi punch manipulators?

　　1. The synchronization source is a number of servo motors. The encoder connected to the crankshaft of the punching machine transmits the angle signal to the control system to achieve the function of synchronous operation with the punching machine. The feeding system can adopt a three-in-one feeder, a yaw feeder or a double-stack type accumulator.

　　2. Automated production of stamping manipulators, strengthen operation safety, increase production capacity, stabilize product quality, and effectively reduce defect rates and costs.

　　3. Adopt PLC and touch-type man-machine interface control system, which can visually check the running status and abnormal monitoring. Various stamping operation parameters can be input, modified and adjusted via the man-machine interface, which is convenient for setting and simple maintenance.

　　4. It has a wrong delivery detection circuit to ensure the safety of the mold and the machine. The main frame adopts a welded structure, and each axis is driven by a precision ball screw, with high positioning accuracy.

　　The above is a brief introduction of the difference between the punching robot and the punching robot. I hope to bring you more understanding. At the same time, friends who have requirements for the feeder or punch peripheral equipment are welcome to come and consult.