The method to ensure the accuracy of the servo NC feeder!Coil Straightener Feeder Dealer

　　The method to ensure the accuracy of the servo NC feeder

　　In the stamping press industry, if you want to realize fully automated stamping production, the punching machine must be equipped with a servo feeder for auxiliary feeding. Therefore, the NC servo feeder plays a key role in the production of the punching machine. If the NC servo feeder cannot accurately feed the material, the subsequent stamping action will not be possible. Complete, and the NC servo feeder is the same as all equipment, incorrect use, it is inevitable that there will be accuracy problems, then how to ensure the accuracy of the servo feeder in our daily use, according to the following methods,

　　1. Purchase a suitable NC servo feeder to meet the requirements of the product material, and choose a servo feeder that can meet the requirements to avoid problems due to the machine itself.

　　2. Check whether there are any abnormalities in the installation of the stamping die, such as whether the position fixation measures are in place, whether there are additional guide pins, whether the positioning of the guide pins is installed correctly, and the installation accuracy must meet the requirements.

　　3. Check whether the NC servo feeder equipment is installed on the punching machine for any problems. The correct installation of the servo feeder is very important to adjust the feeder during the production process.

　　4. Regarding the setting of the NC servo feeder, whether there is any error in the adjustment, such as the loosening device not in place, and the placement of the stamping material.

　　5. The feeding speed of the servo feeder needs to be adjusted when the feeding step is changed, otherwise it will also affect the transmission accuracy of the servo feeder.