The punch feeder does not feed? There are these reasons!

　　During the production process, the punch feeder suddenly stopped feeding. Do you know the reason? Recently, some customers reported that the feeder suddenly stopped working when the automatic production line was running. The operator was at a loss. Through our sales staff, we learned that the main reason was improper operation by the staff. Let’s share with you what are the reasons why the punch feeder does not feed?

　　Failure situation of punch feeder not feeding:

　　The main reason is that the feeder runs normally when it is under manual control, and if it is switched to the automatic mode and then restarted, this time it only feeds once, and it stops and no longer feeds! The operator was overwhelmed for a while. What are the reasons for this situation? How to deal with it?

　　Reasons and solutions for the non-feeding of the punch feeder:

　　Reason 1: The external cam signal line is off or there is a problem with the cam signal. Solution: Check whether the cam signal line wiring is stable and connect it well.

　　Reason 2: The punch feeder may be equipped with multiple feeding methods. Solution: Many customers do not need to feed multiple times at all in the production of punch presses, and because the function is set for multiple times by mistake, the situation is not sent. At this time, only need to turn off multiple feeding.

　　Reason 3: The number of feeding times set by the feeder has reached the set value. Solution: Check whether the feeding count in the touch screen of the feeder reaches the set number. If it reaches, then reset the set value to zero.

　　To sum up, in fact, from the feedback we have collected from many customers, most of this sudden non-feeding situation is mainly caused by the wrong operation of the operator. Therefore, in order to avoid this situation, the "three-in-one" can be updated before starting the machine. Check the items before starting the feeder. Check the machine again. It can also effectively prevent the situation of non-feeding during the production process of the punch feeder.