Three-in-one feeder manual/automatic function introduction

　　Three-in-one feeder manual/automatic function introduction!Customers who have purchased our three-in-one feeder equipment know that there are two operating modes for the three-in-one feeder. The first is manual mode, and the second is automatic mode. These two methods are used in different situations, such as In the test or test machine, the manual mode is generally used to adjust slowly, and the automatic mode is generally used in the formal production. Let's introduce the manual and manual methods of this three-in-one feeder.

　　1. Introduction to the automatic function of the three-in-one feeder

　　After the automatic operation function is turned on, the automatic state indicator is on, and the manual mode indicator is off. The equipment is operated manually for fully automated operation. When this function is turned on, it is recommended that the equipment be debugged in the early stage, and the material angle will be turned on after the manual test is successful. The automatic function allows continuous production operations.

　　2. Introduction to the manual function of the three-in-one feeder

　　This mode is mainly used to select the manual operation mode of the three-in-one feeder. In the manual mode, various manual operations of the three-in-one feeder can be performed. At the same time, the manual state light is on, and the manual operation mode is automatically exited when the automatic operation mode is selected.

　　Three-in-one feeder automatic indication signal introduction

　　1. Fault reset

　　When the three-in-one feeder machine has an alarm and the alarm fault has been eliminated, you need to operate this button to reset the alarm before normal operation can be performed.

　　2. Alarm buzzer

　　When the material is used up and the machine fails, the buzzer will sound an alarm, which is to remind the operator that the three-in-one feeder needs to supplement materials or inspect and repair the three-in-one feeder.

　　3. Three-in-one feeder OK indicator

　　The indicator light used to show the working status of the feeder. When the feeder starts automatically, the OK light is on.

　　4. Three-in-one feeder continuous stop button

　　When the machine is in automatic starting operation, press this button, the machine will stop automatic operation.