Three-in-one feeder material leveling adjustment method

　　The three-in-one feeder is a device that combines the leveler and the feeder, including the material rack, on one machine, making the whole equipment more compact, the feeder accuracy is more accurate, and the production stability is increased. Many customers do not know the leveling adjustment method of the three-in-one feeder for different material thicknesses. Let's take a look!

　　The material leveling adjustment of the three-in-one feeder is realized by the material pressing roller and the adjusting worm gear lifting device to adjust the material pressing force to adjust according to different material thicknesses. The leveling feed in the three-in-one feeder The machine part has a pressing roller worm gear lifting device composed of a hand wheel, a digital dial indicator mechanism, a mounting seat, a worm gear, a worm, a support body, an adjustment shaft, and a timing belt wheel.

　　When the three-in-one CNC feeder material enters the leveling feeder head, by rotating the handwheel of the worm gear lifting device, it will drive the worm to rotate, the worm drives the worm to rotate, the worm gear drives the lifting rod to move up and down, and the lifting rod is driven by the mounting seat The pressing roller moves up and down to adjust the gap. At the same time of adjustment, the synchronous belt wheel is driven by the synchronous belt, and the digital display dial indicator mechanism moves to realize digital display, which can visually display the adjustment amount, which is convenient for the operator to control the feed amount. In addition, since the worm wheel of the worm gear lifting device of the three-in-one CNC feeder of Youyi cannot drive the worm in the reverse direction, the reaction force from the pressing roller cannot drive the worm to rotate after adjusting the positioning, so that the adjusted position will not run away. Bit.