What are the main components of the decoiler and the production line?

　　The decoiler is composed of two parts: power and main engine. The power part is composed of a leveling power base, a reducer, a coupling, a drive gear set, etc. The main motor is a high-power DC motor, equipped with an imported digital DC controller, which can adjust the leveling speed in a wide range. The starting current is less than the rated current, and the starting torque is greater than the rated torque, which is especially suitable for continuous high-load start and is responsible for providing leveling power to the host.

　　The main part of the decoiler adopts a four-fold roller group structure, which is driven by a welded frame, an integral gantry frame, 15 leveling rollers, upper and lower roller shaft seats, beams, rollers, roller seats, and worm gears. It is composed of lifting and pressing device.

　　The decoiler production line is mainly composed of feeding trolley, decoiler, decoiler, feeding mechanism, shearing machine, conveying device, stacking device, etc. The production line can be equipped with a slitting machine to cut the sheets into the required width and cut to length and stack them.

　　The key to the maintenance of the decoiler is the good maintenance of the steel plate on its surface. This kind of steel plate decoiler is mainly aimed at the correction and cutting of various plates, and has a good use effect. It uses a variety of principles to process, and can cut different types of plates and plates with different properties. But after use, the equipment must be maintained and maintained.

　　First of all, apply lubricating oil or butter to the surface of the steel plate of the uncoiler, and brush it regularly, usually for a period of one month; in the process of refueling, pay attention to the equipment in a state of power failure to avoid threats to life.

　　Secondly, for the maintenance of the steel plate of the uncoiler, attention should be paid to the maintenance of its bearings and equipment. Generally, after the operation is completed every day, check whether the parts are loose and the sanitary condition of the equipment. No debris can fall into the equipment. , Regularly do a good job of sanitation maintenance work