What is the feeding speed of the punch feeder?Coil Straightener Feeder company

　　We all know that the punch feeder is divided into many punch presses, such as servo punch feeder, roller punch feeder, air punch feeder, etc. Each feeder has different performance and processing requirements. Then his feeding speed is also different. Let's take a look at the four common feed speeds of punch feeders.

　　The first type, servo punch feeder

　　The servo feeder adopts Yaskawa motor and a precision servo system imported from Japan, with stable performance and high feeding accuracy. Under the premise that the mold has positioning pins, the feeding accuracy is ±0.05mm. In terms of feeding speed, its fastest speed can reach 125m/min. It is indeed the first choice for your servo feeder to maintain such accuracy at such speeds.

　　The second type, high-speed roller punch feeder

　　The feeder is simple in structure, economical and practical, and has low failure rate and easy maintenance. The feeding accuracy is very high, the accuracy can reach ±0.01mm with the guide pin, and the feeding speed can reach 30m/min with the reverse device. The feeder has the advantages of high feeding accuracy, fast speed, no additional energy supply, and extremely low failure rate, making it the most widely used feeder at present.

　　The third type, the new type of clip punch feeder

　　Through the cam drive, the design method of 1 arc cam and 3 plate cams realizes high-speed and stable feeding. It is suitable for materials with a thickness of 0.08-1.5mm, low inertia, and a speed of up to 1500 times per minute, which is a real step toward the field of high-speed stamping.

　　The fourth type, air punch feeder

　　This feeder is the earliest used feeder in the stamping industry. It is mainly used for receiving stamping products with low speed and low precision requirements. The feeding speed of the air feeder is relatively slow, and the feeding accuracy is not high, so it is gradually phased out, but it is simple to operate and affordable. Hope these suggestions will help you to choose the feeder purchase