Y-Track Spinner Hanger Shot Blasting Machines

Y-Track Spinner Hanger Shot Blasting Machines mainly solves the defects in the surface treatment of concrete. It can remove the floating surface and impurities on the concrete surface at one time, and roughen the concrete surface, make the surface uniform and rough, and greatly improve the waterproof layer. The bonding strength with the concrete base makes the waterproof layer and bridge deck better combined, and the cracks of the concrete can be fully exposed to prevent accidents.

Y-Track Spinner Hanger Shot Blasting Machines is an efficient, clean, dust-free method for treating impurities on hard surfaces. This method is commonly used. Inside the shot blasting cleaning equipment are impellers, abrasives and dust rotating at high speed. Then remove impurities into the debris recycling machine, and then recover the cleaned steel shot. The surface of the blasted concrete is clean, hard, and relatively uniform in texture. This method is particularly applicable on barrier-free levels. In order to avoid the risk of buying a shot blasting machine, it is recommended that you confirm the supplier's qualification and product quality before purchasing related products. Beware of counterfeit products.

Y-Track Spinner Hanger Shot Blasting Machines throws particles onto the work surface mechanically at a high speed and a certain angle, causing the particles to hit the sidewalk surface, roughening the sidewalk surface and removing residues. At the same time, the negative pressure generated by the dust collector will be The particles and impurity dust are recovered during the cleaning process, the complete particles will be automatically recovered, and the impurities and dust will fall into the dust box. The road surface shot blasting machine can clean the concrete surface at one time, remove impurities, and roughen the concrete surface, making the surface uniform and rough, greatly improving the bonding strength of the waterproof layer and the concrete base layer, thereby better combining the waterproof layer with the bridge deck Together, and can also fully expose cracks in the concrete to prevent accidents

　　Automotive Shot Blasting and Peening solutions

　　Sandblasting is to use compressed air to spray abrasive to the surface of workpiece at high speed. The purpose of sandblasting is to improve the appearance quality of workpiece surface by removing oxide layer and rust. Shot peening is to make the high-speed hard particles (generally steel particles) hit the surface of metal workpiece, in order to improve the fatigue strength of metal surface. Sand blasting and shot blasting are two different processes and different tools are used. However, both of them can be recycled.

　　The technology of shot blasting cleaning machine replaces the common cold and hot forming process to form large thin-walled aluminum parts, which can not only avoid the residual tensile stress on the surface of the parts, but also obtain the favorable compressive stress for the parts.

　　It should be noted that the service temperature of the parts treated by shot blasting machine should not be too high, otherwise the compressive stress will disappear automatically at high temperature, thus the expected effect will be lost. Their service temperature is determined by the material of the parts, which is about 260-290 ℃ for general steel parts and 170 ℃ for aluminum parts.