Hotline
+86-136 8495 9862
Email:cennia@szmizhi.com
Add::104,Building 27,Third Industrial Zone, Longxi Community,Longgang District,Shenzhen,China.
Surface Treatment Equipment
Coil Forming & Handling Equipment
Solutions
Application
About Us
![](/uploads/allimg/20240604/2-240604113106352.png)
Welcome to MIZHI
For consultation/feedback, please call the service hotline: +86-136 8495 9862 Email:cennia@szmizhi.com
Model No.: DBMT
Applications: Pressing Line/Metal Stamping Line/Forming Line
Applicable Coil Width: 20mm-300mm
Applicable Coil Thickness: 0.3-3.5mm
Coil Inner Diameter: 450-530mm
Coil Outer Diameter: 1200mm
Speed: 15m/min
Aiming to reduce the time to load a roll to the minimum point, this double head decoiler type drives one of the rolls, as the other one waits as a backup.
When the driven roll is over, the backup roll will be ready to be connected to the driver within a very short period of time. When you connect the new roll to the driver, you will have a long time to load another spare roll. Double head decoiler is an ideal solution for production plants where production speed and continuity are crucial in serial manufacturing. So usually configured with the S loop straightener, high speed gear machine and H frame high speed press machine, it’s usually suitable for motor rotor and stator lamination stamping.
Model No.: DBMT
Applications: Pressing Line/Metal Stamping Line/Forming Line
Applicable Coil Width: 20mm-300mm
Applicable Coil Thickness: 0.3-3.5mm
Coil Inner Diameter: 450-530mm
Coil Outer Diameter: 1200mm
Speed: 15m/min
Mandrel Expansion: Manual
Application: Uncoiling the coils
Ideal for high speed lamination stamping line
Usually, double head decoiler machine is equipped with the high speed press machine.
This high speed coil feeding line combined double head decoiler, s-loop straightener, and cam feeder, speed can reach 60m per minute, design for motor and EI lamination stamping.
The configuration of high speed press line for Motor and EI lamination
Step-1: Double Head Decoiler machine, Loading coil and uncoilling coil.
Step-2: High speed S Loop Straightener machine, leveling the strips.
Step-3: High speed Cam Feeder machine, Feed coil to press machine.
Step-4: High speed press machine with the moulds,pressing to the end product
Model | DBMT-200 | DBMT-300 |
Coil Width (mm) | ~200 | ~300 |
Coil Thickness (mm) | 0.1 - 1.6 | |
Coil I.D. (mm) | 450 - 530 | |
Coil O.D. (mm) | 1200 | |
Loading Capacity (kgs) | 500 + 500 | 1000 + 1000 |
Spindle Expansion | Manual | |
Pressing Arm | Optional | |
Power (HP) | Non-motorized | |
Inverter | Without |